Clear-Com WTR-680 - Manual (Page 40)

Fre quency Edit
(User-Programmed Groups Only)
This menu only oc curs for user-programmable groups or when
copy
ing to a user-programable group. The Fre quency Edit
screen al lows the user to set the group trans mit fre quen cies
and re
ceive chan nel fre quen cies of a user-programmable
group.
• Press [MENU] three times to go to the fre quency se lect
screen from the op er at ing screen. Press [SET] to start the
group num ber flash ing. This screen al lows the user to set
the group and fre
quen cies of user-programmed groups
only.
• Press the [UP] / [DOWN] ar rows to change the group
num ber. The fre quen cies listed will re flect what is cur -
rently in that group. Dashes will be dis played in any slots
that are not de fined yet. Pressing [SET] will se lect the
group and start the se lect ing of fre quen cies within that
group. The T1 fre quency will start flash ing.
• Pressing the [UP] / [DOWN] ar rows will change the fre -
quency of “T1” in 25kHz steps. Pressing [SET] will ac -
cept the change and start you ed it ing T2. If you had not
hit the ar row keys when the fre quency was flash ing, but
in stead press [SET], you would have skipped to the next
fre quency to edit.
• Af ter ed it ing the trans mit and the re ceive chan nel fre -
quen cies, press ing [SET] will save that last fre quency and
send you over to the be gin ning of the group/fre quency
select screen with noth ing flash ing. NOTE: Once the end
of the dis played chan nel list is reached, the last dis played
chan nel lo ca tion will scroll to al low the user to edit the re -
main ing chan nels.
• Af ter ac tion has oc curred in the fre quency edit screen hit -
ting [MENU] will take you one menu back to the
group/fre
quency se lect screen so that the user may see
what fre quen cies the base re ceiv ers are now on. If no ac -
tion had oc curred, then pressing [MENU] will take you to
the op er at ing screen. NOTE: Be
sides a group change,
any ed it ing that oc curs within this screen to fre quen cies
DOES NOT take ef fect un til the user ex its the screen via
set ting the last chan nel or press ing [MENU].
7-8
Group 25u
Freq Edit
705.150
565.350
554.250
707.850
710.100
715.300
Group 27u
Freq Edit 705.150
567.800
554.250
707.850
710.100
715.300
Group 27u
Freq Edit
567.800
556.725
Group 27u
Freq Edit
569.350
556.700
[UP] / [DOWN]
[SET]
[UP] / [DOWN]
[SET]
[UP] / [DOWN]
[SET]
707.850
710.100
715.300
705.150
720.550
721.350
721.900
718.550
Group 27u
569.350
556.700
[SET] or [MENU]
(Last Ch Changed)
710.550
714.225
716.800
705.950
END
Fre quency Edit
(User-Programmed Groups Only)