Clear-Com ICS-2003 - Manual (Page 36)

Clear-Com Communication Systems
ICS-2003 Intercom Panel Instruction Manual
2 - 1 0
Figure 2-8: Binaural Headset Wiring
MAINS AC POWER
The panel has a separate, external DC power supply with a removable
AC power cord. The power supply is “universal,” operating over a
voltage range of 90 to 260 VAC and 45 to 65 Hz. The maximum
dissipation is 30 W.
A bracket has been provided to mount this external supply if
necessary.
ADJUSTMENTS
The following panel parameters are adjustable internally on the panel’s
main PCB by selecting options in the configuration program:
• Headset Sidetone
• Panel Microphone Gain
• Speaker Mute
• Page Volume Level
• Panel-to-Matrix card Baud Rate
All these parameters are set to factory defaults. Most panels should
operate at these default settings; however, some applications may
require readjustment.
HEADSET SIDETONE
Sidetone is the sound of the user’s voice in his headset.
Refer to the Eclipse Configuration System Instruction Manual for
instructions on adjusting sidetone.
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
X
X
X
X
X
X
113
115
120
Front Panel Headset Connector
1
2
3
4
5
6
7