Clear-Com ICS-2003 - Manual (Page 17)

Clear-Com Communication Systems
ICS-2003 Intercom Panel Instruction Manual
1 - 9
Remote Telephone Line Release
This function is available only if specifically enabled in the
configuration program. To hang up a TEL-14 telephone interface left off
the hook:
1. Push and hold the “Listen Level” button on the ICS-2003.
2. The CALL SIGNAL: message should be displayed.
3. Wait for approximately 2 seconds after the CALL SIGNAL: message
appears on the display.
4. While holding the “Listen Level” button, press a talk selector for the
desired telephone interface.
5. Release the “Listen Level” button.
Note: In addition to hanging up the telephone interface, this will
deactivate any talk/listen selector set to the interface from
anywhere in the system.
Keypad: Administrative Buttons
The upper portions of 5 of the 12 buttons are labeled with the function
active during normal panel operation; these functions are:
• (3) “Menu”
• (5) “Display Listen” Labels
• (9) “Swap” window
• (*) “Dial” phone
• (#) “SA” (studio/stage announce)
Menu Button (3)
The “Menu” (3) button on the keypad accesses the Information, Local
Configuration, System Configuration, and Maintenance menus.
Pressing the “Menu”(3) button also displays the panel’s port number
and label.
To access the menus:
1. Push the “Menu” (3) button.
2. Use the selectors and keypad as indicated to select the appropriate
menu.
If another panel calls while in a menu, that panel’s label will be added
to the answer-back stack and the operator’s voice will be heard. To
respond, push the “Answer Back” selector.
Information Menu
The Information menu allows viewing, but not modifying, the following
items:
• View Party Line Members
• View Fixed Group Members
• View Monitoring List
• View Forced Listens