Clear-Com ICS-2003 - Manual (Page 18)

Clear-Com Communication Systems
ICS-2003 Intercom Panel Instruction Manual
1 - 1 0
• View Nearby Panels
View Party Line Members
This function displays interfaces preset to a party line. Use the cursor
buttons or selectors to select the desired party line.
View Fixed Group Members
This function displays panels and interfaces in each fixed group. Use
the cursor buttons or selectors to select the desired fixed group.
View Monitoring List
This function displays all panels monitoring the panel. An ear symbol in
the symbol window indicates monitoring of the panel.
View Forced Listens
This function displays destinations or sources of forced listens. Use the
selectors to select Destinations or Sources.
Viewing Destinations displays all panels or interfaces always
connected to the panel’s out-going audio. Viewing Sources displays all
panels or interfaces always connected to the panel’s incoming audio.
View Nearby Panels
This function displays all the labels set for nearby panels. This means
that two panels are within hearing distance of each other and that an
audio path between the panels can result in an audio feedback loop.
Audio paths to panels designated as nearby panels cannot be
established.
Local Configuration Menu
Selecting the Local Configuration menu allows modifying the following
items:
• Answer Back Time-Out
• Internal Level Adjust
• Display Brightness
Answerback Time-out
This menu increases, decreases, or disables the time period a caller’s
label will remain in the answer-back window. The time period is
adjustable from 10 to 60 seconds in 10 second increments; the default
period is 10 seconds. Use the selectors to change the time-out period.
Internal Level Adjust
This menu changes the panel microphone, the headset microphone,
and the headset sidetone gain. Use the selectors to raise or lower the
gain.
Display Brightness
This menu adjusts the brightness of the panel’s display. Use the cursor
buttons or selectors to adjust the brightness.