Clear-Com ICS-2003 - Manual (Page 15)

Clear-Com Communication Systems
ICS-2003 Intercom Panel Instruction Manual
1 - 7
Answer-Back Label Selection
If another call or calls comes in while using the answer-back selector:
• The user will hear the caller’s voice
• The label will be placed in the answer-back stack.
To answer the next caller:
1. Push up on the “Answer Back” selector to highlight the desired label
in the answer-back stack.
2. Once the desired label is highlighted, press the selector down to
talk.
Removing Labels from the Answer-Back Stack
Any label will be automatically removed from the stack if it is not
answered within a certain time interval, which is set by the
answer-back auto-clear time in the configuration program.
To manually remove the current caller’s label from the answer-back
stack, push up on the “Answer Back” selector.
Calling an Unassigned Panel
To call a destination in the answer-back stack:
1. Push up on the “Answer Back” selector to highlight the desired label
in the answer-back stack.
2. Once the desired label is highlighted, press the selector down to
talk.
Keypad: Single-Function Buttons
The first column of buttons on the keypad consists of:
• “Mic On/Off”
• “Speaker On/Off”
• “Mic Select”
• “Listen Level”
Mic On/Off Button
This button activates the panel or headset microphone, whichever has
been selected. The LED indicates when the microphone is on. If a talk
is activated while the microphone is off, it will turn on for the duration of
the call.
Speaker On/Off Button
This button functions only when a headset is plugged into the panel. To
toggle the speaker on and off, push the “Speaker On/Off” button. The
LED indicates when the speaker is on.