Clear-Com HX System Frames - Manual (Page 69)

5.9.1 Eclipse HX-Omega rear connector panels
There are seven types of rear-connector panels:
Panel Description
CPU card A CPU-card rear panel holds the various connectors
associated with the CPU card, such as the RS-232
connector for the configuration computer.
Analog port card (MVX-A16) Analog port-card rear panel holds the sixteen RJ-45
connectors associated with its corresponding
analog port-card front panel.
User panels, interface modules and other intercom
devices connect to the matrix through this rear-
connector panel.
E-MADI64 card An E-MADI64 rear card comprises a MADI fiber
connector, MADI input and output coaxial cable
connectors, and a coaxial Video / Word clock input.
E-FIB fiber card An E-FIB fiber card provides two ports to connect
fiber network cables.
E-QUE card An E-QUE card provides eight RJ-45 ports for
connection to wireless equipment and three RJ-45
ports for DECT sync and LAN connections.
IVC-32 card An IVC-32 card provides a RJ-45 port for
connection to an IP network. No other ports are
used.
LMC-64 card An LMC-64 card provides a RJ-45 port for
connection to an IP network. No other ports are
used.
Table 12: Rear connector panels
Note:
A blank panel covers an unused slot in the matrix.
69 Eclipse HX-Omega User Guide