1 chapters summary, Chapters summary – Clear-Com HX System Frames User Manual
Page 12
2.1 Chapters summary
Chapter
Summary
1 Important Safety
Instructions
UL approved safety instructions concerning the installation,
maintenance and operation of the Eclipse HX-Omega.
Introduction to the Eclipse HX-Omega User Guide (this guide).
An overview of the Eclipse HX system, the Eclipse HX-Omega
matrix, and the cards and interface modules that may be fitted to
the matrix.
4 Installing the
Eclipse HX-Omega
Describes how to install the Eclipse HX-Omega matrix, including
CPU, analog port and expansion cards.
Describes how to use the Eclipse HX-Omega, including the front
panel controls and the information LEDs, the CPU card, and power
supplies.
Describes the E-MADI64 card, which provides up to 64 duplex
channels of AES3 digital audio over a coaxial cable or fiber pair
between compatible devices. The card supports both direct and
trunk connections.
Describes how to set up and use the E-FIB fiber card, which is used
to connect the Eclipse HX-Omega with other Eclipse HX matrices.
Describes how to set up and use the E-QUE interface, which is
used to connect the Eclipse HX-Omega with wireless intercom
systems (such as CellCom / FreeSpeak), E1 and T1 trunk lines,
and E1 direct lines.
9 IVC-32 card for IP-based
connections
Describes how to set up and use the IVC-32 interface, which
enables the Eclipse HX-Omega to connect over IP to V-Series IP
panels, Concert servers and other IP-based intercom systems.
Describes how to set up and use the LMC-64 card to provide
audio level metering to Production Maestro Pro (the Eclipse
HX centralized routing tool application).
11 Maintaining the
Eclipse HX-Omega
Describes maintenance tasks for the Eclipse HX-Omega,
including the replacement of components.
Technical specifications for the Eclipse HX-Omega.
Glossary of terms used in relation to the Eclipse HX system
Table 1: Chapters summary
12
Eclipse HX-Omega User Guide