Clear-Com HX System Frames - Manual (Page 22)

• CCI-22 dual party-line interface module.
• FOR-22 four-wire interface.
• GPI-6 general purpose inputs interface module.
• RLY-6 relay (general-purpose outputs) interface module.
• AES-6 digital interface module used with V-Series panels fitted with the AES-3 option
card. It may also be used with AES-3 compliant third party equipment.
• DIG-2 digital interface module (transparent to the system, configured in EHX as the
type of panel it is connected to). Only used for V-Series panels fitted with the T-
Adapter option card and ICSxx T type panels.
3.6 EHX configuration software
The EHX configuration software controls the operation of the connected audio devices by
sending signals to the circuit cards in the matrix, which then relay the signals to the audio
devices.
Configurations (the operating parameters of complete system setups) are created and
managed in EHX.
Up to four complete system configurations can be stored in the CPU card of the Eclipse HX
Omega, for retrieval and activation when required. The external PC that hosts the EHX
software can store an almost unlimited number of complete system configurations (the
number is only limited by the available memory space on the PC).
You can download the configurations to the Eclipse HX-Omega as required.
22 Eclipse HX-Omega User Guide