Hydrotech 6200 SXT Automatic Meter Initiated Water Softener - Manual (Page 35)

34
Servicing and Replacing Brine Line Flow Control (BLFC)
Servicing and Replacing Drain Line Flow Control (DLFC)
2. Remove the BLFC assembly and pull
the flow washer retainer out of the
BLFC housing with then help of plier.
3. Remove the flow washer from the
retainer and clean it with water to
remove any debris. Replace it with a
new washer if necessary
4. Re-install the BLFC housing
and retainer
1. Disconnect the brine line
retainer clip
1. Disconnect the drain line retainer clip.
2. Remove the DLFC assembly and pull the flow washer out
of the DLFC housing with then help of plier.
3. Remove the flow washer from the housing and clean it
with water to remove any debris. Replace it with a new
washer if necessary.
4. Re-install the DLFC housing and retainer.
DLFC
Retainer
Flow Washer
Housing
Hose
Barb
Flow Washer