Burkert Type SE30EX - Manual (Page 3)

8
note
the device may be damaged by the fluid in contact
with.
• Systematically check the chemical compatibility of the
component materials of the device and the fluids likely
to come into contact with it (for example: alcohols,
strong or concentrated acids, aldehydes, alkaline
compounds, esters, aliphatic compounds, ketones,
halogenated aromatics or hydrocarbons, oxidants and
chlorinated agents).
English 9
4. GEnErAl informATion
To contact the manufacturer of the device, use following
address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
The addresses of our international sales offices are avai-
lable on the internet at:
www.burkert.com
information on the internet
You can find the user manuals and technical data sheets
regarding the type SE30 Ex at:
www.burkert.com
English 9
10
5. DEclArATion of
conformiTy
We, Burkert, declare as manufacturer that the following
product:
ELECTRONIC FLOWMETER
Type SE30 Ex
with the marking II 1 G/D or I M1, meets the specifications:
• of EC Directive 94/9 concerning equipment intended
for use in explosive atmospheres. For the evaluation the
following standards have been taken into account:
- EN 60079-0 (2006)
- EN 60079-11 (2007)
- EN 61241-0 (2004)
- EN 61241-11 (2007)
• of EEC Directive 2004/108/EEC on electromagnetic
compatibility. For the evaluation the following standards
have been taken into account:
- Emission according to EN 61000-6-3 (2007)
- Immunity according to EN 61000-6-2 (2005)
The EC type certification LCIE 04 ATEX 6070 X was
prepared by LCIE (Laboratoire Central des Industries
Electriques, 33 avenue du G
al Leclerc, BP 8, F-92266
Fontenay-aux-Roses).
English 11
Provided the use is conform to their intended purpose and/
or provided installation is conform to the standards in force
and/or to the recommendations of the manufacturer and
the special conditions for safe use specified in the EC type
certification. See chap. 6 of this manual.
Notification of assessment of the quality system N° PTB 98
ATEX Q008-2 was prepared by the PTB (Physikalisch-
Technische Bundesanstalt, Bundesallee 100, D-38116
BRAUNSCHWEIG).
Triembach-au-Val, February 18th 2010 Quality insurance
Bürkert S.A.S Bruno Thouvenin
Rue du Giessen
F-67220 Triembach-au-Val
English 11