Burkert Type 2105 - Manual (Page 8)

8
Productdescription
• Low-turbulence flow.
• High flow values by the streamlined valve body.
• Maintenance-free under normal conditions.
5.4 Options
• Control unit
Different versions of the activation units are available depending
on the requirement.
• Stroke limitation
Limit of the maximum open position / flow rate by means of
adjusting screw.
• Feedback indicator
The product features mechanical limit switches or inductive prox-
imity switches.
5.5 product versions
actuator sizes
The piston-controlled diaphragm valve is available for the following
actuator sizes:
ø 50 mm, ø 70 mm, ø 90 mm, ø 130 mm.
pilot pressure
Designs with lower pilot pressure (reduced spring force) are
available on request.
Contact your Bürkert sales office or our Sales Center, e-mail:
[email protected]
5.6 Designated application area
The diaphragm valve has been designed for use with dirty, aggressive,
abrasive, ultrapure or sterile media. The valves may only control media
which do not corrode the body and the seal materials (see type label).
Observe the maximum pressure range according to the
type label!
• Dirty, aggressive, abrasive, ultrapure or sterile media.
• Highly viscous media.
5.6.1 application areas
e.g. plant construction
luxury food and food processing industry
bottling plant
chemical engineering
pharmaceutics
biotechnology
english
Type 2103, 2104, 2105