5 removal – Burkert Type 2105 User Manual
Page 34
34
Installation
1
2
Pilot air port
CFA, CFB, CFI
Air discharge connection CFA, CFB
and second pilot air port CFI
Fig. 38: Pneumatic connection
control air hose:
Control air hoses of sizes 6/4 mm or 1/4“ can be used.
Optionally a pilot air port is possible via a G 1/8 thread.
8.5
removal
Danger!
risk of injury from discharge of medium and pressure!
It is dangerous to remove a product which is under pressure due
to the sudden release of pressure or discharge of medium.
▶ Before removing a product, switch off the pressure and vent the
lines.
procedure:
→
Loosen the pneumatic connection.
→
Remove the product.
Replacement of the diaphragm is described in the chapter
entitled “11 Repairs”.
english
Type 2103, 2104, 2105