FlexLink WL322 (322 мм) Монтаж - Manual (Page 9)

Tools
C
rea
ted by
EBCCW
00:
06
5 5683EN-1
2 Tools
2.1 General tools
To assemble a FlexLink conveyor, you will need most of the tools listed on
the following pages. Not all are essential, but they will make your assembly
work easier and more efficicient.
Hand tools
10 and 13 mm box wrench
Cutters (for cutting slide rail)
Set of metric Allen keys
Roller thread fluteless tap and tap wrench (M6 and M8)
Countersink bit
Tape measure
In addition, the tools listed below can be useful:
Files
Socket wrench
Screw-driver
Pliers
Knife (for cutting off plastic screw heads)
Soft faced hammer
Clamp (for chain installation)
Level
Power tools
Cross-cut circular saw for aluminium
Hand drill
Drill bit (for fixing of slide rail):
XS:
∅3,2 mm, XL/XM/XH/XK: ∅4,2 mm