FlexLink WL322 (322 мм) Монтаж - Manual (Page 14)

Fasteners
10 5683EN-1
Figure 1 XCAN
On the support beam, the slot nut can be entered into the T-slot from the
beam side. It will stay in position in vertical T-slots because of a thin leaf
spring.
IMPORTANT
Slot nuts can not be used with conveyor beams.
4.3 Connecting strips
Figure 2 Connecting strips
Connecting strips are used for joining beams together, end to end. Use Al-
len key and set screws when attaching the connecting strip to the beam.