1 about this manual, 1 introduction, 2 document disposition – FlexLink WL322 (322 мм) Монтаж User Manual
Page 7: 3 installation site preparations, 1 assembly planning, 1 prepare by studying your assembly drawing, 2 ensure that the necessary tools are available, 1about this manual
About this manual
C
rea
ted by
EBCCW
00:
06
3
5683EN-1
1
About this manual
1.1
Introduction
The main purpose of this manual is to help self-building end users, with little
or no prior experience, to assemble a FlexLink WL conveyor system.
Each chapter includes instructions and pictures showing how to assemble
the different parts.
1.2
Document disposition
The document is divided into the following five main parts:
•
Installation site preparations
•
Tools and fasteners
•
Cutting FlexLink beams
•
Assembly
•
Start-up and testing
1.3
Installation site preparations
1.3.1
Assembly planning
Work systematically:
1
Prepare by studying your assembly drawing.
2
Ensure that the necessary tools are available.
3
Make sure you have all the materials and components needed to
assemble the conveyor system. Check with the parts list.
4
Make sure you have enough floor space to mount the conveyor
system.
5
Check to see if the floor at the installation site is even, so that all
feet can be properly attached to the floor.