FlexLink WL322 (322 мм) Монтаж - Manual (Page 17)

Assembly
C
rea
ted by
EBCCW
00:
06
13 5683EN-1
5 Assembly
5.1 Introduction
5.1.1 Component groups
The basic FlexLink conveyor structure consists of five component groups:
• support structure
• conveyor beams, straight sections and bends
• drive and idler units
• chain
• other accessories (guide rail, drip trays etc.)
The first step in the assembly process is to assemble the support structure,
which consists of feet, support beams and beam connectors. Most convey-
or support designs are based on vertical support beams combined, if nec-
essary, with horizontal support beams. There are also a number of different