FlexLink WL322 (322 мм) Монтаж - Manual (Page 19)

Support design
C
rea
ted by
EBCCW
00:
06
15 5683EN-1
6 Support design
The WL conveyor system uses standard FlexLink feet, refer to appendix for
assembly instructions.
6.1 Special tool when mounting feet
Conveyor beams are mounted on to the support structure by means of sup-
port brackets. To get the right distance between the holes, use the drilling
template. The drilling template are fitted on the support structure using the
T-slots. Tighten the star knob before drilling.