eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 64)

264
Relay in normal status
The table below possible status states of the sensor icon are described in the following list.
Map icon Sensor status
Video camera is armed, sensor is in normal
status
Video camera is armed, sensor is in alarm
status
Video camera is disarmed, sensor is in normal
status
Video camera is disarmed, sensor is in alarm
status
Exporting Frames and Video Recordings
Frame export
Export of frames is accessible in all viewing tile modes.
To export a video image frame, you must perform the following steps:
1. Enable the Snapshot function (see the section titled Using the Snapshot function ) if video
surveillance is in real time, or stop playback, if video surveillance is in any other mode.
Note
You do not need to enable the Snapshot function to export a frame while
paused in the archive (in Alarm Management mode or archive mode).
2. Bring up the context menu in the viewing tile (1).
3. Select Export snapshot (2).
4. The snapshot will then be saved in .JPG format in the directory specified in the export
settings (see the section titled Configuring export ).
Export of the frame is now complete.
eLineTechnology.com 303.938.1133