eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 6)

206
viewing tile are shown at their original size.
Autozoom stops when a viewing tile is selected and resumes when the viewing tile is no longer
active.
To enable autozoom, in the viewing tile context menu, select Enable autozoom.
Important
Autozoom is available if situational analysis is enabled on the camera in question
(see
Enabling Situation Analysis ) or if one of the embedded detection tools is
enabled (see Creating a Sony Ipela Detection Tool object )
Note
Autozoom resizing takes into account objects from all tracking sources that are
activated for a particular video camera
To disable autozoom, select the corresponding command in the viewing tile context menu.
Video surveillance in archive mode
Switching to Archive Mode
To switch the viewing tile from a different surveillance mode to archive analysis mode, switch to
the
tab in the lower-right corner of the tile.
Note
If the video camera is not linked to a video archive, this tab will be unavailable.
Note
In Live Video mode, if the viewing tile is not active, the tabs for switching to
other modes are not displayed. To display the tabs, click the viewing tile by using
either button of the mouse.
eLineTechnology.com 303.938.1133