eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 28)

228
Once a segment is selected for replay, the following operations are accessible:
1. Play recording:
2. Pause/Stop playback:
3. Go to the preceding frame .
4. go to the next frame .
It is possible to change the mode (forward/reverse) and speed of playback. To do this, use the
slider.
Reverse playback of a video fragment:
Forward playback of a video fragment:
For reverse playback of a recording, move the slider to the left of the position corresponding to
zero playback speed (the center of the slider); for forward playback, move it to the right. The
current playback speed is displayed to the left of the slider. During forward playback of a
recording, a + sign appears before the speed; during reverse playback, a - sign appears.
The value 0X corresponds to zero speed, i.e., no playback; the value 1X corresponds to the frame
rate of recording. At a speed less than 1X, playback is slower than the speed of recording.
Note
The maximum speed of forward and reverse playback is 1x.
Processing an Alarm
To process an alarm, use the group of colored buttons in the lower left-hand corner of the Alarm
Management tile. After processing of the alarm, the viewing tile on the given client automatically
eLineTechnology.com 303.938.1133