eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 21)

221
2. In the lower-left corner of the viewing tile, click the button.
3. An alarm will then be initiated in the system and the viewing tile will automatically switch to
alarm mode for evaluation of the situation.
Note
When in Alarm Management mode, the user that initiated the alarm will be
indicated at the bottom of the viewing tile.
Manual initiation of an alarm is now complete.
Automatic Initiation
An alarm is initiated automatically if a Record and alarm rule, to be executed when a detection
tool is triggered is triggered, is activated (see the section titled Recording to Archive and Initiation
of an Alarm ).
eLineTechnology.com 303.938.1133