Switch to alarm management mode – eLine Technology EYS-VMS eyStream User Manual Part3 User Manual
Page 24

224
Switch to Alarm Management mode
When an alarm is initiated, the system switches to alarm mode automatically at the moment the
event is accepted for processing. Video surveillance functions available in Alarm Management
mode To switch the viewing tile back from a different surveillance mode to Alarm Management
mode, click the
button in the lower-right corner of the tile.
Note
In Live Video mode, if the viewing tile is not active, the tabs for switching to
other modes are not displayed. To display the tabs, click the viewing tile by using
either button of the mouse.
The viewing tile will then appear in Alarm Management mode.
eLineTechnology.com
303.938.1133