eLine Technology EYS-VMS eyStream User Manual Part3 User Manual
Page 3

203
Control Using the Dialer Panel
To switch a PTZ camera to a preset, you can use the dialer panel. To display the dialer panel, click
the Dialer button.
To switch to a preset using the dialer panel, you must perform the following steps:
1. Using the numeric buttons (0-9), enter the number of the preset to which you want to
switch.
The dialed number is displayed in a special field.
To delete the last digit dialed, click the
button.
2. Click the
button to switch to the preset with the number entered. The camera will then
be switched to the desired position.
Switching to a preset using the dialer panel is now complete.
Note
Examples of entering a number:
5,
– Switch to preset number 5;
0, 5,
– Switch to preset number 5.
5, 7,
– Switch to preset number 57.
Control Using a Virtual Joystick
A PTZ video camera can be controlled with a virtual joystick through the PTZ device control panel.
The virtual joystick is shown in the following figure.
eLineTechnology.com
303.938.1133