Working with the interactive map, Activating audio monitoring, Volume control – eLine Technology EYS-VMS eyStream User Manual Part3 User Manual
Page 57: Opening and closing the map

257
Note
In Archive mode and Archive Search mode, an audio recording can be played
back only from the microphone corresponding to the currently selected video
camera, and only in forward playback mode at a speed of 1x.
Activating audio monitoring
Attention!
The Microphone object must be enabled (see the section titled
The Microphone
Object
).
To activate audio monitoring in any surveillance mode, left-click the speaker icon in the viewing
tile.
The volume icon and volume adjuster now become active.
Volume control
Volume is controlled in any surveillance mode using the volume adjuster
.
Note
The volume adjuster must be active.
The far left position of the adjuster represents the minimum volume, and the far right position
represents the maximum volume.
Working with the Interactive Map
Opening and closing the map
You can switch to Map View from all modes of operation except for Archive Search.
To go to Map View, point the cursor at the pop-up Map button and click it.
eLineTechnology.com
303.938.1133