eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 17)

217
It is possible to change the mode (forward/reverse) and speed of playback. To do this, use the
slider.
Rapid reverse playback of an entry:
Rapid forward playback of an entry:
For reverse playback of a recording, move the slider to the left of the position corresponding to
zero playback speed (the center of the slider); for forward playback, move it to the right. The
current playback speed is displayed under the slider. During forward playback of a recording, a +
sign appears before the speed; during reverse playback, a - sign appears.
The value 0X corresponds to zero speed, i.e., no playback; the value 1X corresponds to the frame
rate of recording.
At a speed less than 1X, playback is slower than the speed of recording; at speeds greater than
1X, it is faster.
Note
Both forward and reverse playback may be accelerated up to 16X.
Navigation via the time indicator
The time indicator in a viewing tile can be used to set the time of the current day on the timeline
to which you want to navigate in the archive.
To do so, left-click the indicator and specify the time in HH:MM:SS format. Press the Enter key.
eLineTechnology.com 303.938.1133