eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 61)

261
In immersive mode you can view video from only one video camera at a time.
To select another video camera, do one of the following:
1. In a viewing tile, select the necessary video camera (see Selecting a video camera ).
2. Click the video camera icon or its field of view on the map, if possible.
3. Exit immersive mode and select the necessary video camera on the map.
To exit immersive mode, do one of the following:
1. Click the button.
2. Minimize the viewing tile by clicking the
button.
3. Click a part of the map that does not contain the camera field of view.
Note
Actions 2 and 3 do not apply if a fisheye camera is in immersive mode (see Fishe
ye cameras in immersive mode )
Switching between maps
In any mode, you can switch between the maps that have been created in the system.
You can switch between maps in two ways:
1. In the lower-left corner of the screen, select the corresponding tab
eLineTechnology.com 303.938.1133