eLine Technology ANPTZ-70-10DN - Manual (Page 36)

31
Using the OSD Menu
En
gl
is
h
• ###: Action number.
• DWELL: Dwell time in mm:ss between 1 sec.~4 min.
• OPT: Preset speed (2~360) when preset is selected. Or, number of
repetitions (1~255) when Pattern or Swing is selected.
6. Press [Near] to confirm each function and repeat step 5 to configure
up to 20 functions.
7. Press [Far] when finished editing the group functions.
8. Select SAVE and press [Near] to save the group or [Far] to discard.
5.4 SYSTEM INITIALIZE
The System Initialize menu allows you to reset settings to factory
defaults or reboot the camera.
• CLEAR ALL DATA: Resets all configuration data, including display,
camera, and motion setup.
• CLEAR DISPLAY SET: Resets Display settings.
• CLEAR CAMERA SET: Resets Camera settings.
• CLEAR MOTION SET: Resets Motion settings.
• CLEAR EDIT DATA: Deletes all Preset, Swing, Pattern, and Group data.
• REBOOT CAMERA: Reboots camera module.
• REBOOT SYSTEM: Reboots speed dome camera.
eLineTechnology.com