eLine Technology ANPTZ-70-10DN - Manual (Page 24)

19
Using the OSD Menu
En
gl
is
h
Submenus:
• System Information: View information about the camera.
• Display Setup: Configure camera OSD.
• Dome Camera Setup: Configure camera image settings and PTZ
functions.
• System Initialize: Reset camera settings to factory defaults.
5.2 DISPLAY SETUP
This menu allows you to turn sections of the OSD display ON or OFF. If an
item is set to AUTO, the item is displayed only when its value is changed.
• CAMERA ID [ON/OFF]: Shows the ID of the camera.
• PTZ [ON/OFF/AUTO]: Shows the camera’s position.
• ACTION TITLE [ON/OFF/AUTO]: Shows the name of the currently
selected action (e.g. Swing, Pattern, or Group).
• PRESET LABEL [ON/OFF/AUTO]: Shows the name of the currently
selected preset.
• ALARM INPUT [ON/OFF/AUTO]: Shows alarm I/O status.
NOTE: Privacy Zone is not supported.
eLineTechnology.com