eLine Technology ANPTZ-70-10DN - Manual (Page 35)

29
Using the OSD Menu
En
gl
is
h
To create a Pattern using keyboard controller shortcuts:
• Press [1~4] and press [Pattern] for 2 seconds. Define the pattern
motion and then press [Near] to save or [Far] to cancel.
To run a Pattern using keyboard controller shortcuts:
• Press [1~4] and then press [Pattern].
To create a Pattern using the OSD menu:
1. Go to the Pattern Setup menu (Menu>Dome Camera Setup>Pattern
Setup).
2. Configure the following:
• PATTERN NUMBER [1~4]: Selects Pattern number to edit. If a selected
pattern number is not defined, UNDEFINED is displayed under
selected pattern number.
• CLEAR PATTERN [CANCEL/OK]: Select OK to and then press [Near]
to delete data in current pattern.
• EDIT PATTERN: Press [Near] to start editing pattern. Move the joystick
to the desired start position and press [Near] to save. Move the joystick
to the desired end position and press [Near] to save or [Far] to cancel.
5.3.6 GROUP SETUP
The Group function allows you to create a sequence of Presets, Patterns,
and/or Swings. A maximum of 8 Groups can be stored with up to 20
30
Using the OSD Menu
actions each. The dwell time is the time interval between actions and is
adjustable in the menu.
To run a group using keyboard controller shortcuts:
• Press [151~158] and then press [Preset] to run groups 1 ~ 8.
To setup a group:
1. Go to the Group Setup menu (Menu>Dome Camera Setup>Group
Setup).
2. Under Group Number, select a group number between 1~8.
3. Select Edit Group and press [Near].
4. Press [Near] in NO ACTION.
5. Move cursor [Up/Down] and press [Near] to configure functions.
Configure the following settings for each function:
• ACTION: Type of action.
eLineTechnology.com