eLine Technology ANPTZ-70-10DN - Manual (Page 28)

23
Using the OSD Menu
En
gl
is
h
5.3.2 MOTION SETUP
Motion Setup allows you to setup the motion settings of the camera.
• MOTION LOCK [ON/OFF]: When set to ON, Motion Lock prevents
Presets, Auto Pans, Patterns and Groups from being overwritten
using the keyboard controller shortcuts. You may still run those
functions using shortcuts or edit them using the OSD menu.
• POWER UP ACTION [ON/OFF]: When set to ON, after starting up, the
camera will resume the last action executed before powering down.
Preset, Pattern, Swing and Group may be resumed but Jog actions
may not be resumed.
• AUTO FLIP [ON/OFF]: When set to ON, image is automatically flipped
when tilt goes past 90°. When set to OFF, tilt is limited to 90°.
• JOG MAX SPEED [1~360/Sec]: Sets maximum jog speed. Jog speed
is inversely proportional to zoom magnification. As zoom
magnification goes up, pan/tilt speed goes down.
• JOG DIRECTION [INVERSE/NORMAL]: When set to NORMAL, pan/tilt
moves in the same direction as the joystick. If set to INVERSE, pan/
tilt moves in the opposite direction.
• FREEZE IN PRESET [ON/OFF]: If set to ON, image freezes while
moving between presets.
eLineTechnology.com