Draw-Tite 59800 ROOF RACK - Manual

Pad Kit
(25-0124)
End Support
(27-0757 Left,
27-0761 Right)
*4x
Fig. 1a
Fig. 2
Parts List: (Refer to Fig.1a)
NOTE: Prior to Assembly
Prior to assembling, check that the kit contains all the parts you will
need to fit the Roof Racks. Refer to the Parts List for guidance.
Please read these fitting instructions prior to assembly.
STEP 1: Fitting Straps to End Supports
Ensure the Lock Barrels have been inserted into the End Support
Covers before assembly.
A.
B.
Qty Item Part No.
1 Front Cross Bar - with Buffer Strip 1003-0945
2 Left End Support 27-0757
2 Right End Support 27-0761
1 Front Left / Rear Right Strap 114660
1 Front Right / Rear Left Strap 114661
1 Rubber Pad Kit 25-0124
4 Hinge 27-0760
1 Security Key 22-0811
4 M6 x 50mm Bolt 22-0355
4 1/2” Screw 22-0221
4 End Support Cover Kit 25-0150
1 Fitting Instructions
1 Warranty
Feed the strap neck through the cavity in the End Support (Fig 3a).
When the Strap neck has been pushed through the End Support
cavity, rotate the strap downwards until the mounting holes in the
End Support and the strap are alligned.
Cross Bar
(1003-0945,
1009-0910)
35-13/16”(910mm)
37-1/4”(945mm)
Security Key
(22-0811)
50mm Bolt
(22-0355) 4x
1/2” Screw
(22-0221)
4x
Fit Kit - Hardware
HYUNDAI ELANTRA TOURING
2009 - on
59800
Issue A
03/05/09
59800N
Sheet 1 of 2
Maximum Carrying Capacity: : 110lbs (50kg)
Hinge
(27-0760)
Front Right
Front Left
Rear Right
Rear Left
Ensure strap notches correspond with mount positions on the
vehicle (Fig 2).
FR = Front Right; FL = Front Left
RR = Rear Right; RL = Rear Left.
Fig 3a.
24mm
gap
Fig 3c.
Fig 3b.
C. Use the security key provided to feed the bolt into the cage nut in
the top of the strap.
The bolt head should mate up flush with its mounting face (Fig 3b).
D. When threading the bolt through the cage nut in the top of the strap,
ensure to allow a gap of approx. 24mm from the top of the strap
neck to the bolt mounting face. (Fig 3c).
This will aid in the fitment of the roof rack onto the vehilcle roof as
described on Page 2 of this document Step 2c.
Front Right Front Left
Rear Right Rear Left
1 Notch 2 Notchs
1 Rear Cross Bar - with Buffer Strip 1003-0910
www.rolaproducts.com
Cequent Performance Products - Plymouth, MI
Technical Service: (888)521-0510
PRINTED IN AUSTRALIA
*4x
End Support
Cover
(25-0150)
Printed in XXXXX