Draw-Tite 26015 DUAL CAM HP - Manual

Installation Instructions
Dual Cam HP
High-Performance Sway Control
Part Numbers:
26015
DUAL CAM HP ASSEMBLED
Equipment Required:
Wrenches: 1-1/2” Open End, ¾” Open End, Torque wrench
Drill Bits: 7/16”, 17/32” & Center Drill (Pilot Drill)
INDEX
1. INSTALLATION & ASSEMBLY P. 2-4
2. PRE-INSTALLATION (TOW VEHICLE MAY NOT BE PRESENT) P. 4
2. INSTALLATION WITH TOW VEHICLE PRESENT P.4-5
3. TUBULAR FRAME DUAL CAM HP FRAME PLATE INSTALLATION P. 5-6
4. C-CHANNEL FRAME DUAL CAM HP FRAME PLATE INSTALLATION P. 6
5. CAM ARM ADJUSTMENT P. 7
6. BEFORE EACH TRIP & MAINTENANCE P. 7
7. NOTES P. 8
8. LIMITED LIFETIME WARRANTY P. 8
© 2011 Cequent Performance Products, Inc.
Sheet 1 of 25 26015N 04/24/12 Rev. D
Fastener Kit: 122044
Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating, or
Trailer Manufacturer’s Rating
Form: F205 Rev A 5-6-05
DEALER/INSTALLER:
(1) Provide this Manual to end user
END USER:
(1) Read and follow this Manual every time you use Dual Cam HP.
(2) Save this Manual for Future Reference.
(3) Pass on copies of Manual to any other users or owner.
j
k
l
*
m
*
n
*
WARNING:
Failure to follow all of these instructions may result in death or serious injury!
Figure 1
*For Tubular Style Frame Attachment
**Not Shown, For C-Channel Style Frame Attachment
½” Open End, ¾” Socket & Ratchet
Other: 8 – 10” C-Clamp, Tape Measure, Light Penetrant Oil
For Installation or Operation Support contact CPP Technical Service: 1-888-521-0510.
Figure 2 – Inside View of Trailer Frame
j
Qty. (2) Dual Cam HP Cam Arm Assembly
k
Qty. (2) Hanger Bracket
l
Qty. (6) ½ - 13 Thread Forming Screw*
m
Qty. (2) ½- 13 X 3 ½” Square Head Bolt*
n
Qty. (6) ½-13 Hex Nut*
o
Qty. (2) ½” Lock Washer**
p
Qty. (4) ½- 13 X 1 ½” Grade 5 Bolt**