Analog Way Smart Edge - Manual (Page 27)

25
The [FREEZE] button of the STE100 allows users to freeze the Main
output current display or the active input, depending on the freeze
mode: Freeze All or freeze the current selected input [INPUT FREEZE] .
The STE100 [TAKE] button allows to switch from Preview to Main
outputs. By pressing the [TAKE] button, what you have setup on your
preview screen will be transitioned to the Main output display.
The STE100 [EFFECT] selection button is the shortcut to the current
layer.
The STE100 [PRESET] selection button allows you to instantly
recall a saved preset.
The STE100 [ADJUST] button allows you to active layers for
modifying the parameters
The [PIP] button of the STE100 allows you to switch between the
two available layers, PIP layer (when PIP bottom is activated) and
background live layer (when PIP bottom is not activated).
Freeze button
Take button
Effect selection button
Preset selection button
Adjust button
PIP button
* NOTE *: keying and titling available with an external Remote Control.
!