Analog Way Octo Value User Manual

Page 23

4-2. USING THE FRAME

This function allows memorizing up to 4 frames (images) in order to display them at any time during the show.

IMPORTANT :

The output format used when displaying the frame should be the same as the one used during

the FRAME storing.

• HOW TO STORE A FRAME :

Select the source to be stored as a frame (with the INPUT SELECTION buttons).

Select the

record frame mode (LOGOS/FRAME > record frame) : the device displays a white rec-

tangle corresponding to the frame selection area onto the output. If necessary adjust the position and

size of the frame selection area (

IMAGE > pos settings).

Store the frame (

LOGOS/FRAME > record frame > store). The memorization starts and will take about

2 minutes.

NOTE : For motion picture, use the FREEZE function, before doing the memorization.

• HOW TO DISPLAY the FRAME ON or OFF :

To turn the FRAME ON, select a Frame selection button on the front panel (

Fn then F1, F2, F3 or F4)

then press TAKE.

To turn the FRAME OFF, select an input selection button, then press TAKE.

PAGE 22