Analog Way Octo Value - Manual (Page 13)

STARTING
2-1. OCTO VALUE CONNECTIONS
NOTE : Turn OFF all of your equipment before connecting.
❶ Connect the AC power supply cord to the device and to an AC power outlet.
❷ Connect your computer & video sources to the 8 universal inputs of the device.
• If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
• Connect your others sources to the unused inputs. See following sections to have a complete description.
IMPORTANT : Connect only one source per input.
❸
Connect your MAIN display device (projector, plasma screen...) to the HD15 or DVI MAIN connector.
❹
If required, connect your PREVIEW display device (projector, plasma screen...) to the HD15 PREVIEW
connector.
Turn ON the device (rear panel switch), then turn ON all your input sources and then your display device.
Connection diagram :
CAMERA COMPUTER NOTEBOOK VCR / DVD PLAYER
INPUT SOURCES
MAIN DISPLAY
PREVIEW DISPLAY
MAIN PROJECTOR
RS-232 communication port
on a DB9 female connector or
TCP/IP on RJ45 connector
❶
❷ ❸
❹
❸ ❷
❹
PAGE 12