CEMB USA C68SE (B) User Manual

Page 24

Text mode
Original mode

Visualisation excentri-

cité

I 0201 GB - 24

N.B.: If the fi rst harmonic value is higher than the limit indicated by setup parameters (see FIRST
HARMONIC LIMIT), at the end of the eccentricity measurement, the following window appears:

In this case, it is advisable to rotate the tyre on the rim by 180° in order to reduce the eccentricity
value measured.

For more detailed information, press pushbutton

Eccentricity Display

CAUTION

Before balancing the wheel, it is advisable to rotate the
tyre on the rim by 180° in order to educe the eccentricity
measured.
CAUTION! The current eccentricity of 1.0 mm gives rise
to a force more or less equivalent to that generated by an
imbalance of 33.2 gr at a speed of 120 km/hour.