CEMB USA C68SE (B) User Manual
Page 19

I 0201 GB- 19
5.5.3 - UNBALANCE OPTIMIZATION
The symbol
is displayed automatically for static unbalance exceeding 30 grams (1.1 oz). The
program allows reducing the total unbalance of the wheel by compensating, when possible, the unbalance
of the tyre with that of the rim. It requires two spins with rotation of the tyre on the rim in the second spin.
Press
MENU'
+
3
after a fi rst spin and follow the instructions appearing on the monitor.
5.5.4 - ALU AND STATIC MODES
From the Measurement screen, press button
2
: a window with the possible modes appears.
Select the type required through the numeric keys. The return to the Measurement screen with the
recalculated values is automatic. A symbol always appears at the top of the screen indicating the enabled
weight application position.
UNBALANCE OPTIMIZATION
- CAUTION!! The previous spin should have been performed
with the currently mounted wheel.
- Indicate the rim-adapter position with a reference mark
in order to remount the rim on the adapter in the same position.
- Remove the wheel from the wheel balancer.
- Turn the tyre on the rim by 180°.
- Remount the wheel on the wheel balancer positioning
the reference mark of the rim with that of the adapter.
- Close the guard and press the (START) push button.
Cancel
Type of correction
STATIC
DINAMIC