CEMB USA C68SE (B) - Manual (Page 14)

I 0201 GB - 14
- ALU S wheel
Likewise in the ALUS correction mode, the dimensions can be entered or changed manually by using the
buttons indicated on the screen and by following the diagram indicated by the graph.
To access the Manual ALUS dimensions presetting screen, press:
1) CUTTING SETTING TYPE OF CORRECTION = ALUS
MENU' + 4 or 6 from the dimensions screen in automatic mode (can be reached by pulling out
the distance + diameter gauge)
2) CURRENT SETTING TYPE OF CORRECTION
≠ ALUS
MENU'
+
4
+
6
For a clearer understanding of the indications given by the graph, consult the following diagram:
- To return to the standard wheel dimensions presetting screen, press button
6
.
Distance reading