CEMB USA C206 (A) - Manual

I 0638 - 1 GB
Instructions for use
I
CONTENTS
1 - GENERAL 3
1.1 - GENERAL SAFETY REGULATIONS 3
1.1.1 - STANDARD SAFETY DEVICES 3
1.2 - FIELD OF APPLICATION 3
1.3 - OVERALL DIMENSIONS 3
1.4 - TECHNICAL DATA 3
2 - HANDLING, LIFTING 4
3 - START- UP 4
3.1 - ANCHORING 4
3.2 - ELECTRICAL CONNECTION 4
3.3 - ADAPTER MOUNTING 4
3.4 - WHEEL MOUNTING 4
4 - CONTROLS AND COMPONENTS 5
4.1 - AUTOMATIC DISTANCE AND DIAMETER GAUGE 5
4.2 - WHEEL LIFTING DEVICE 5
4.3 - MANUAL SPINNING DEVICE 5
4.4 - CONTROL PANEL AND DISPLAY 5
4.4.1 - CONTROL OF THE FUNCTIONS MENU 6
5 - INDICATIONS AND USE OF THE WHEEL BALANCER 7
5.1 - PRESETTING OF WHEEL DIMENSIONS 7
5.1.1 - AUTOMATIC PRESETTING 7
5.1.1.1 - STANDARD WHEELS (calibration necessary also for STATIC & COMBINED MODES) 7
5.1.1.2 - STATIC & COMBINED MODES 8
5.1.1.3 - WHEEL ALUM 8
5.1.2 - MANUAL SETTING 9
5.1.2.1 - STEEL WHEEL RIMS 9
5.1.2.2 - WHEEL ALUM 9
5.1.2.3 - ALUM VARIANT WITH INSIDE CLAMP WEIGHT 10
5.2 - RECALCULATION OF THE UNBALANCE 10
5.3 - RESULT OF MEASUREMENT 10
5.3.1 - INDICATION OF EXACT CORRECTION POSITION 11
5.3.2 - SPLIT FUNCTION (UNBALANCE SPREAD) 12
5.3.3 - UNBALANCE OPTIMIZATION 13
5.3.4 - ALU AND STATIC MODES 14
5.3.5 - AUTOMATIC MINIMIZATION OF STATIC UNBALANCE 14
6 - SET UP 15
6.1 - SELF-DIAGNOSTICS 15
6.2 - SELF-CALIBRATION 16
6.3 - AUTOMATIC GAUGES CALIBRATION 17
6.3.1 - RIM DISTANCE GAUGE 17
6.3.2 - DIAMETER GAUGE 18
7 - ERRORS 19
7.1 - INCONSISTENT UNBALANCE READINGS 20
8 - ROUTINE MAINTENANCE 20
8.1 - TO REPLACE THE FUSES 20