Climax BB5000 24 inch Facing Head Accessory - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
sPeciFications
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Facing Diameter 2.25 – 24.0 57.2 – 609.6
Swing Diameter 20.1 – 25.3 510.5 – 642.6
(Turning arm can be repositioned)
Feed, Feed Rate
Automatic, 0 – 0.11/revolution Automatic, 0 – 2.794/revolution
Operating Weight 40 lbs 18.2 kg
Shipping Weight 110 lbs 49.9 kg
Shipping Dimensions 38-1/8 x 17-13/16 x 6-1/8 inches 968.4 x 452.4 x 155.6 cm
(shipped in 1 container)
Ordering Information
Material: A-36 steel plate
Motor: Hydraulic with 11.3 in3 (185.2 cm3)
displacement (Climax PN 21532)
HPU/Flow: 5 Hp, 4.7 gpm (5 Hp, 17.8 L/min)
Feed Rate: 0.004 inches (0.102 mm) per revolution
Feed Direction: Feeding in
Bar RPM: 24
Depth of Cut: 0.020 inches (0.508 mm)
Surface Finish: 250 µin
Flatness: 0.003 over 20 inches (0.08 over 508 mm)
Tool Bit: HSS cutter (Climax PN 32344)
Bearing Spacing: 49.5 inches (1257.3 mm) from back side
of bearing mounts
Cutting Oil: None
Machine Orientation: Boring bar mounted vertically
with 2 double arm mounts
Material: A-36 steel plate
Motor: Electric 112/55 bar RPM
(Climax PN 37557)
Feed Rate: 0.007 inches (0.178 mm) per revolution
Feed Direction: Feeding in
Bar RPM: 24
Depth of Cut: 0.030 inches (0.762 mm)
Surface Finish: 350 µin
Flatness: 0.002 over 15 inches (0.051 over 381 mm)
Tool Bit: HSS cutter (Climax PN 32344)
Bearing Spacing: 49.5 inches (1257.3 mm) from back side
of bearing mounts
Cutting Oil: None
Machine Orientation: Boring bar mounted horizontally
with 2 double arm mounts
Machining Example #1 Machining Example #2
Climax PN 31412 30051 30044 35858 36936 36954 45040 60301
Item Name
Bar Dia.
1-¼ (31.8) 2.0 (50.8) 2-¼ (57.2) 1-3/4 (44.5) 2-¼ (57.2) 2-¼ (57.2) 2-¼ (57.2) 2.0 (50.8 mm)
Swing Dia. 6.6 - 9.4
(167.6 - 238.8)
9.1 - 22.2
(231.1 - 563.9)
10.0 - 18.6
(254 - 472.4)
13.5
(342.9)
13.5
(342.9)
20.3
(515.6)
Facing Dia. 2.1 - 8.8
(53.3 - 223.5)
2.5 - 18
(63.5 - 457.2)
2.5 - 18
(63.5 - 457.2)
2.5 - 12
(63.5 - 304.8)
2.5 - 12
(63.5 - 304.8)
2.5 - 19.0
(63.5 - 482)
Grooving Dia. n/a n/a n/a 3.5 - 12
(88.9 - 304.8)
4.0 - 12.0
(101.6 - 304.8)
4.0 - 19.0
(101.6 - 482.6)
3.3 - 24.0
(83.8 - 609.6)
Adjustable Range Facing Heads Heavy Duty Facing Head
20.1 - 25.3
(510.5 - 642.6)
2.25 - 24.0
(57.2 - 609.6)
Facing & Grooving Heads