Climax BB7100 LINE BORING MACHINE - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring and Facing Ranges:
Boring diameter range, standard stack block assembly: 10.25 - 57.5 inches 260.4 - 1460.5 mm
Boring diameter range, boring/facing arm assembly:
with 18 inch (457.2 mm) boring/facing arm 22.1 - 30.5 inches 561.3 - 774.7 mm
with 23 inch (584.2 mm) boring/facing arm 25.1 - 40.5 inches 637.5 - 1028.7 mm
with 34 inch (863.6 mm) boring/facing arm 35.9 - 62.5 inches 911.9 - 1587.5 mm
Facing diameter range, mechanical facing head assembly: 12.0 - 57.5 inches 304.8 - 1460.5 mm
Facing diameter range, boring/facing arm assembly:
with 18 inch (457.2 mm) boring/facing arm 17.8 - 30.5 inches 452.1 - 774.7 mm
with 23 inch (584.2 mm) boring/facing arm 17.8 - 40.5 inches 452.1 - 1028.7 mm
with 34 inch (863.6 mm) boring/facing arm 17.8 - 62.5 inches 452.1 - 1587.5 mm
Facing diameter range, boring/facing arm assembly (tool post reversed):
(“tool post reversed” refers to rotating the tool post so that the tool is on the bar side of the tool post.)
with 18 inch (457.2 mm) boring/facing arm 9.6 - 17.4 inches 243.8 - 442.0 mm
with 23 inch (584.2 mm) boring/facing arm 9.6 - 27.4 inches 243.8 - 696.0 mm
with 34 inch (863.6 mm) boring/facing arm 9.6 - 49.4 inches 243.8 - 1254.8 mm
Performance Data
Rotational Drive Unit (RDU) Gear Ratio: 10.59:1 gear reduction
Hydraulic motor size affects torque and speed
Theoretical values calculated using a 25 Hp hydraulic power unit producing 2000 psi (13790 kPa) continuous,
[normal operation is 1200 psi (8270 kPa)] and pumping 15 gpm (68 l/min).
Hydraulic motor size range:
3.6 - 17.9 in3 59.9 - 293.3 cm3
Boring Bar Torque: 750 - 2900 ft•lb 1020 - 3930 N•m
Max boring rpm: 90 - 18 rpm 90 - 18 rpm
For example, with 11.3 in3 (185.3 cm3) hydraulic motor (43457):
Boring Bar Torque: 2280 ft•lb 3090 N•m
Max boring rpm: 29 rpm 29 rpm
Feed rate of mechanical Axial Feed Unit (AFU): 0.003 - 0.025 in/rev. 0.076 - 0.635 mm/rev.
Feed rate of electric Axial Feed Unit (AFU):
In “slow” speed 0 - 0.3 in/min. 0 - 7.6 mm/min.
In “fast” speed 2.0 - 100 in/min. 50 - 2500 mm/min.
Measures:
Operating weight (estimated) 2012.3 lbs. 912.8 kg
Typical machine consisting of Rotational Drive Unit (RDU), Axial Feed Unit (AFU), boring head set,
tool carrier, 2 bearing mounts, 12 foot (365.8 cm) bar, tool kit, and hydraulic motor.
Shipping weight (estimated), for machine
(metal crate) 2203 lbs. 999.3 kg
Shipping weight (estimated), for machine (wood crate) 2117.3 lbs. 960.4 kg
(machine with RDU, AFU, boring head set, tool carrier, tool kit, and hydraulic motor.)
Shipping weight (estimated), set of 2 Bearings 780 lbs. 353.8 kg
Shipping weight (estimated), Boring Bar 5.9 lbs/inch 1.05 kg/cm
Shipping weight (estimated), 15 Hp Hydraulic Power Unit 750 lbs 340.2 kg
Shipping weight (estimated), 25 Hp Hydraulic Power Unit 875 lbs 396.9 kg
Shipping dimensions:
Machine, in wood crate, W, D, H 24 x 37 x 20.6 inches 610 x 940 x 524 mm
Machine, in steel crate, W, D, H 43.3 x 29.5 x 22.5 inches 1099 x 749 x 571.5 mm
Bearing (each bearing shipped separately) W, D, H 36.5 x 36.5 x 17 inches 927 x 927 x 432 mm
12 foot (365.8 cm) bar W, D, H 15 x 14 x 158 inches 381 x 356 x 4013 mm
15 or 25 Hp Hydraulic Power Unit W, D, H 24 x 43 x 47 inches 610 x 1092 x 1194 mm