Climax FF6000 PORTABLE FLANGE FACER - Manual (Page 2)

FF6000 Specifications
Specifications
US Metric
Machine height overall 19.5 inches 495.3 mm
Minimum bore diameter:
with standard single plane chuck
14.0 inches 355.6 mm
with optional large bore chuck 32.0 inches 812.8 mm
Maximum bore diameter:
with standard single plane chuck
32.0 inches 812.8 mm
with optional large bore chuck 60.0 inches 1524.0 mm
Minimum flange diameter:
with standard single plane chuck
14.0 inches 355.6 mm
with optional large bore chuck 32.0 inches 812.8 mm
Maximum flange diameter:
with standard single plane chuck
42.0 inches 1066.8 mm
with optional large bore chuck 60.0 inches 1524.0 mm
Minimum space required inside bore to set up chuck assembly 3.5 inches 88.9 mm
Air motor 1.45 Hp 1.09 kW
Air motor requirements (at maximum power) 90 psi @ 620 kPa @
32 ft 3 /min 0.91 m 3 /min
Torque at cutter (at rated Hp) 550 ft-lb 748 N•m
Gear reduction 9.73:1 9.73:1
Turning bar length 25.5 inches 647.7 mm
RPM (Turning Bar) 0 - 22.5 free speed 0 - 22.5 free speed
Shipping weight 634 lbs 289 kg
Shipping Dimensions (Metal Crate) 39 x 26 x 29 inches 991 x 660 x 737 mm
Standard mounting Single plane removable chuck
Cutter One (1) 0.5 inch sq HSS lathe tool bit, furnished
with the machine. NOTE: 12 mm square tool bits
can also be used.
Radial Feed Automatic, infinitely variable reversible 0.003 -
0.032 inch (0.08 - 0.81 mm) per revolution.
Tool down feed Automatic, infinitely variable 0.003 - 0.010 inch
(0.08 - 0.25 mm) per revolution.
All dimensions
should be considered
reference. Contact
your Climax
Representative for
precision dimensions.
Specifications are
subject to change
without notice.
Climax Portable Machine Tools, Inc. 2712 E. Second Street, Newberg, OR 97132 USA Web site: www.cpmt.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2