Climax BW1000 WELDING CONSUMABLES QUICK REFERENCE GUIDE - Manual (Page 2)

WELDING CONSUMABLES QUICK REFERENCE GUIDE
TORCHES TORCH EXTENSIONS
TORCH ACCESSORIES
inch mm Climax Bortech
#00 0.88 - 1.8 22.4 - 45.7 29063 A1008
#0 1.75 - 3 44.5 - 76.2 28448 A1009
#1 2.75 - 5.5 69.9 - 139.7 29064 A1007
#1A 3 - 5.5 76.2 - 139.7 39723 A1071
#2 4.5 - 7.5 114.3 - 190.5 29032 A1010
#3 6 - 9 152.4 - 228.6 29033 A1011
#4 8 - 11 203.2 - 279.4 29034 A1012
#5 10 - 13 254.0 - 330.2 29035 A1013
#6 12 - 15 304.8 - 381.0 30345 A1021
#7 14 - 17 355.6 - 431.8 31792 A1022
#8 16 - 19 406.4 - 482.6 30346 A1017
#9 18 - 21 457.2 - 533.4 30710 A1053
#10 20 - 23 508.0 - 584.2 30711 A1054
#11 22 - 25 558.8 - 635.0 30712 A1077
#12 24 - 27 609.6 - 685.8 30713 A1078
Bearing Clearance Torch 12 - 27 304.8 - 685.8 63916 A1389
#13/24 26 - 54 660.4 - 1371.6 34473 A1082
#000 0.5 - 1 12.7 - 25.4 39724 A1058
27013 A1020
OD Trammel Torch,
extended range
28
max dia.
711.2
max dia. 38506 A1145
OD Trammel Torch,
extended range
56
max dia.
1422.4
max dia. 53004 A1269
Compact Face Torch
6 inch (152.4 mm) swing
2 - 19 50.8 - 482.6 48013 P1389
28186 A1035
28020 A1084
Swivel Torches - BW1000 (106, Dozer)
inch mm Climax Bortech
#1 Swivel 2.75 - 8.2 69.9 - 208.3 39725 A1138
#2 Swivel 8 - 12 203.2 - 304.8 39726 A1139
Includes standard torch adapter.
Needs a minimum 6 inches (152.4 mm) of axial clearance.
Conical Torch
Bore ID Part Number
Description
Requires dedicated borewelder w/ fast rotation motor and push/ pull feeder
assembly. Use with 0.023 Wire & Weld approx. 75 amps.
Requires 10 inch (254 mm) radial mount and slow rotation belt & pulley.
OD trammel, face & conical torches require one set of counter-balance &
extensions. Includes standard torch adapter.
Requires 10 inch (254 mm) radial mount & mounting rod extension
Description
Bore ID Part Number
OD Trammel Torch
Standard Face Torch, 8 inch (203.2 mm) swing
Requires 10 inch (254 mm) radial mount & mounting rod extension
inch mm Climax Bortech
Torch extension 3 76.2 29038 A1019
Torch extension 6 152.4 29039 A1014
Torch extension 12 304.8 29040 A1015
Torch extension 18 457.2 29065 A1016
Description
Reach Part Number
Climax Bortech
Adapter - Standard Torch to Face & Trammel 36170 A1128
Adapter - Standard Torch to Swivel Head -
model 106 & BW1000 (Dozer) 33804 A1134
Counterbalance 30756 A1079
Mounting rod extender 30831 10239
Swivel Head Assembly - BW1000 (106 & Dozer 35603 A1137
Torch Extension Support - BW3000 (306-P) 33256 A1031
Torch Support Arm - BW1000 (106 & Dozer) 40877 A1124
Stick Electrode Holder - connects to same cable quick-
couple that attaches to borewelder
36169 A1086
Description
Part Number
(required for mounting OD trammel, facing & conical seat torches)
World Headquarters
2712 E. Second Street
Newberg, Oregon 97132 USA
Worldwide Telephone: 1.503.538.2185
N. America Toll-Free: 1.800.333.8311
Fax: 1.503.538.7600
Email: [email protected]
European Headquarters
Am Langen Graben 8
52353 Düren, Germany
Telephone:(+49) (0) 2421.9177.0
Fax: (+49) (0) 2421.9177.29
Email: [email protected]
Copyright © 2013 Climax Portable Machining & Welding Systems. All Rights
Reserved. Climax has taken reasonable measures to ensure the accuracy
of the information contained in this document. However, Climax makes no
warranties or representations with respect to the information contained herein;
and Climax shall not be held liable for damages resulting from any errors or
omissions herein, or from the use of the information contained in this document.
*Rebuilds/refurbishment of torches done on request
(Torches must be returned to Climax)
Connect with us: