Climax CM6200 CIRCULAR MILL - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPeCiFiCatiOnS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Machine Performance Ranges
ID/Face Mount Mounting range 78.9 - 177.2 inches 2004.1 - 4500.9 mm
Milling diameter range (to center of spindle) 73.5 - 189.0 inches 1866.9 - 4800.6 mm
max with 10 inch (254.0 mm) diameter mill 199 inches 5054.6 mm
Single-point machining diameter range 69.5 - 189.0 inches 1765.3 - 4800.6 mm
Grinding diameter range 73.5 - 189.0 inches 1866.9 - 4800.6 mm
Swing diameter at minimum 135.6 inches 3444.2 mm
Swing diameter at maximum 197 inches 5003.8 mm
Kingpin clearance diameter 25 inches 635.0 mm
Radial tool slide travel 24 inches 609.6 mm
Axial tool head travel, milling 8 inches 203.2 mm
Axial tool head travel, single-point machining 4 inches 101.6 mm
Depth required inside bore for ID chuck 12.31 ± 0.25 inches 312.7 ± 6.4 mm
(± 0.25 inches (± 6.4 mm) is travel of leveling foot)
OD: Mounting range (center of mounting plate) 98.4 - 209.9 inches 2499.36 - 5331.46 mm
Milling diameter range 69.5 - 184 inches 1765.3 - 4673.6 mm
Single-point machining diameter range 69.5 - 189.0 inches 1765.3 - 4800.6 mm
Grinding diameter range (center of grinder) 73.5 - 189.0 inches 1866.9 - 4800.6 mm
Depth required inside bore for chuck 0 inches 0 mm
Rotational Drive System
Drive type Milling and single-point machining Electric Servo
with Pinion and internal ring gear
Single-point machining Air actuated feedbox engaged by machine rotation
and infinitely adjustable remotely
Requires air supply of 90 psi @ 1 ft³/min
(620 kPa @ 0.028 m³/min)
electric power, input requirements:
Electric servo power 230V, 380V, 415V, 460V, or 575V
Speed Range:
Milling & grinding w/ reducer Servo: 0.001 - 1.5 RPM
Feed Rate, single-point machining (air feed) 0.002 - 0.035 in/rev 0.051 - 0.889 mm/rev
Measures
Machine height:
Milling or single-point configuration, ID
43.5 ± 0.25 inches 1104.9 ± 6.35 mm
(w/o hose tower, ± for leveling)
Milling or single-point configuration, OD
42.5 inches 1079.5 mm
Grinding configuration 43.5 inches 1104.9 mm
Machine weight, total (approximate):
Milling or single-point configuration, ID 10,000 lbs 4535.9 kg
Milling or single-point configuration, OD 12,000 lbs 5443.1 kg
Grinding configuration 10,030 lbs 4549.5 kg
Servo touchscreen 25 Hp HPU 1,200 lbs 544.3 kg