Climax PL3000 LATHE - Manual (Page 3)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 3
sPecifications
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
No. Description
Overall length, electric
std. bar fully retracted 27.0 inches 685.8 mm
std. bar fully extended 43.0 inches 1092.2 mm
Overall length, pneumatic
std. bar fully retracted 31.0 inches 787.4 mm
std. bar fully extended 47.0 inches 1193.8 mm
Overall width 10.5 inches 266.7 mm
Overall height, with the optional 16.0 inches 406.4 mm
Turning Reach (from spindle face)
standard bar 16.0 inches 406.4 mm
standard bar w/ optional extension 22.0 inches 558.8 mm
Shaft dia. max 11.25 inches 285.8 mm
Shaft dia. min
with standard tool holder (18368) 8.0 inches 203.2 mm
with optional tool holder (10644) 6.0 inches 152.4 mm
with optional tool holder (10643) 4.0 inches 101.6 mm
Swing clearance, min. radius 8.375 inches 212.7 mm
Axial feed, automatic 0.003 - 0.011 inches/rev 0.076 - 0.279 mm/rev
Turning bar diameter 2.31 inches 58.7 mm
Cutter 3/8 inch lathe tool bit 10 mm lathe tool bit
Tool depth adjustment, manual 1.125 inches total 28.575 mm total
radial travel in three increments of: 0.375 inches 9.525 mm
Power, electric
120V, 60 Hz continuous 3.08 Hp 2.30 kW
Intermittent 4.80 Hp 3.58 kW
230V, 50 Hz continuous 3.08 Hp 2.30 kW
Intermittent 4.80 Hp 3.58 kW
Torque: 98 ft-lbs (135 N·m) max at 72 rpm bar speed. Bar free speed: 72 rpm max. Gear ratio: 8:1. Variable
speed control with settings 20 - 72 rpm.
Power, pneumatic 1.22 Hp 0.91 kW
[non-reversing, Hp rated at 265 rpm). Torque: 24.2 ft-lbs (32.9 N·m) at full power, 33 rpm. Gear ratio 8:1.
Infinitely variable speed control with needle valve. Air flow required: 90 psi @ 30 ft3/min
(620 kPa @ 0.85 m3/min).]
Operating weight 200 lbs. 90.7 kg
Shipping weight 261 lbs. 118.4 kg
Shipping dimensions L x W x H 33 x 27 x 17 inches 838.2x685.8x431.8 mm