MoTeC M1 Tune User Manual User Manual
Page 62
User Manual
USING M1 TUNE
Printed documents are not controlled
Page 61
11.14.1.1 Manual Migration
As M1 projects can become quite complex, it may be required to compare two packages to see
what has changed.
To do this:
1. Open an offline Package, or connect online to an ECU.
2. Select menu
File > Add Compare Package
.
When in the compare mode, the user can view the Packages through the usual components,
such as Calibrate, and see the differences in the data.
There are also some dedicated windows to assist in looking at the changes. Two of these are
accessed from
Tools > Compare Data
or
Tools > Compare Firmware
. The windows displayed
from these options display the differences with a red highlight. The data in these windows can
be both viewed and modified.