7 q calibrate functions – MoTeC M1 Tune User Manual User Manual

Page 52

User Manual

USING M1 TUNE

Printed documents are not controlled

Page 51

11.7

Q CALIBRATE FUNCTIONS

The

key performs special functions on parameters and tables that were not available in older

ECUs. The function is different depending on the selected item.

Note: The

function can now perform a calibrate against any parameter or table

displaying the

icon.

For example

When the item is selected, and the

key pressed, M1 Tune performs a special function that will

generally calibrate that value.

An example of this is setting throttle position high and low values. The process for this would be
as follows:

1. Select the

Throttle Pedal Main Closed

parameter.

2. Close the throttle and press the

key.

►

The current pin voltage is determined and

Throttle Pedal Main Closed

parameter is set to

that value.