MoTeC M1 Tune User Manual - Manual (Page 28)

User Manual
WORKSHEET COMPONENTS
Printed documents are not controlled Page 27
10.2.1 Calibrate List
The Calibrate list contains channels and their values and is displayed on the left-hand side of the
Calibrate component.
Note: What channels are displayed in this list is governed by the list type selected in the
Calibrate properties. See
Calibrate Component Properties.
How the list displays information can be adjusted using the Calibrate list toolbar (located at the
top of the list) as defined below.
Calibrate List Toolbar
Each option in the toolbar operates as described below.
Select in what manner the list is displayed - a flat list, compact tree or
full tree. The full tree mode is very useful as it reduces the visible list
to a more manageable size by grouping the contents, this grouping
relationship is as the items were organised by the application
developer in M1 Build.
Toggles the channel values on and off. When on, the list includes the
current live values of any channel that match the current Calibrate list
type.
Limits the list to show only items that are currently invalid. Invalid
items are tables or channels that contain values that do not meet
their validation criteria. These items should normally be corrected
before running an engine.
When you are in comparison mode (comparing one Package with
another), the Calibrate List indicates what is the same and what is
different between the two Packages, and by how much. Selecting
this option limits the list to only show items that are different.
Search input area that will search through the current list for any
items that match both the current Calibrate list type, and the search
value.