B&K Precision 9150-9153 - Manual - Manual (Page 16)

16
None< Default >
Even
Odd
Address Set Set the communication address (range from 0 to 30)
Address=＊＊
Port Mode Select mode of digital port
Trigger< Def >
RI/DFI Note: DFI is not available for models 9150, 9151, 9152,
9153
DIGITAL I/O Note: Digital output not available for models 9150, 9151,
9152, 9153
Trig Source Setting the trigger mode
Immediat
Pressing
Shift
+
Trigger
keys will generate a
trigger pulse
External Ext. Trigger signal is applied to the digital port in the rear
panel.
Bus Remote command trigger mode.
RI Mode Configure the Remote Inhibit (RI) mode
Off< Default > Disable this function
Latching
Live
DFI Source Configure the Discrete Fault Indicator (DFI) mode
Note: Not used for models 9150, 9151, 9152, 9153
Off< Default >
QUES Question Bit
OPER Operation Bit
ESB Event State Bit
RQS Require Bit
Key Lock Set Setting keypad password.
Press
Enter
directly to disable the key lock function.
Password= ****
Exit
System Set
Max Volt. set Set the Maximum Voltage.
Max= ****
Step Volt Set Set the voltage step
Step=****
Exit
List Set Configure list files
Call ListFile Recall list operation file.
Recall *
Edit ListFile Edit list operation file.
Continuous
Once
Repeat
Step
Once
Repeat
Save Mode Set Users can allocate 4 types of memory space to save the list file.
8 X 25 Steps
4 X 50 Steps