B&K Precision 9150-9153 - Manual - Manual (Page 15)

15
to assign and store the current settings to the selected memory location
To recall a setting
Press the Recall key. Use the knob to scroll to the memory location where the settings you want to recall are
stored. Press
:
ENTER
to recall and activate those settings
You can also use the SCPI command:*SAV *RCL to save and recall respectively.
3.6 Menu Operation
3.6.1 Menu Description
Press Shift :Menu to enter menu mode. The menu parameters will be displayed in the bottom right field of the
display. Use the
▲
and
▼
keys to scroll through the menu list and press to select a menu and view the
parameters. Press
ESC
to return to the higher level menu and to return to the main operating mode.
MENU
Config
Config Init. Return to the factory default setup value.
Out Recall Set the Power ON/OFF state after power up.
On “Remembers” and restores the Power ON/OFF state of the
power supply before power was turned off.
Off Disable this function.
PWR-ON Recall Recall operating parameters of power supply after power up
On “Remembers” and restores the operating parameters of the
power supply (voltage, current settings..) before power was
turned off.
Off Disable this function.
Key Sound Set Keypad sound setting.
On Enable key sound.
Off Disable key sound
Knob Lock Set Enable/disable the rotary knob.
On Lock the rotary knob.
Off< Default > Unlock the rotary knob.
Remote Sense Setup voltage measurement Mode.
On The power supply will measure the input voltage at the
remote sense connector.
Off< Default > The power supply will measure the input voltage at the
front panel connector.
ShortCut Call Shortcut of the recall function
On Enable this function
Off Disable this function
Meter Rate Set the update speed of the power supply meter
High High speed
Low Low speed
Baudrate Set
Baudrate 4800
Baudrate 9600
Baudrate 19200
Baudrate 38400
Comm. Parity Configure the parity bit.
ENTER